190 Paltalk 1000 %ld 1001 pgp +nomanual +armor=off %s 1002 Conn%d 1003 IP%d 1004 Host%d 1005 %d 1006 Queue empty 1007 Queue length: %ld 1008 Cannot set multicast loopback mode, error %d: %s 1009 Cannot %s membership to multicast group %s, error %d: %s 1010 add 1011 drop 1012 Cannot initialize socket library, error %d: %s 1013 Windows Sockets version %02X.%02X, I need at least %02X.%02X 1014 Cannot create input socket, error %d: %s 1015 Cannot create timeout timer 1016 Communications pre-read error %d. 1017 Communications read block error %d. 1018 Data transmission (CRC) error. 1019 Communications error event notification %d. 1020 Communications pre-write error %d. 1021 Communications write block error %d. 1022 Communications write CRC error %d. 1023 Cannot create transmit socket for host %s, error %d: %s 1024 Cannot schedule name fetch for host %s, error %d: %s 1025 Cannot open file %s. 1026 Cannot create transmission cadence timer 1027 Get host name error for host %s, error %d: %s 1028 %lu 1029 %u 1030 %u%u 1031 pgp -e +nomanual +armor=off %s %s 1032 COM%d 1033 %s (%s) 1034 (%s) 1035 Address %s is not a multicast group. 1036 %d-bit, %u/sec 1037 Packet size: %u bytes 1038 Cannot set multicast scope for host %s, error %d: %s 1039 Cannot find multicast group %s, error %d: %s 1040 Cannot initiate search for host %s, error %d: %s 1041 Cannot locate host %s, error %d: %s 1042 Message %d of %d 1043 %d messages 1044 Playing %d 1045 Can't write to sound device: %s. 1046 Cannot open modem, error %d. 1047 Cannot initialise communication port, error %d. 1048 %s/%u 1049 %s %02d-%02d-%02d %02d:%02d:%02d 1050 , %u %d bit samples/sec 1051 failed, status %u. 1052 sfpgp.pif +nomanual +armor=off %s 1053 sfpgp.pif -e +nomanual +armor=off %s %s 1054 Cannot open Look Who's Listening socket, error %d: %s 1055 Cannot send Look Who's Listening BYE packet, error %d: %s 1056 Cannot send Look Who's Listening source ID packet, error %d: %s 1057 Cannot connect to Look Who's Listening host, error %d: %s 1058 Timeout sending periodic Look Who's Listening update. 1059 P%d 1060 .RTP:%02X%02X%02X%02X 1061 (%s) 1062 Cannot send Look Who's Listening query, error %d: %s 1063 Cannot read Look Who's Listening reply, error %d: %s 1064 /%d 1065 Cannot open face image file %s 1066 Face image file %s is not a 256 colour uncompressed bitmap (.BMP) or GIF file. 1067 Cannot create control socket for host %s, error %d: %s 1068 Unsupported encryption algorithm: %s. Only %s is available. 1069 User: 1070 E-mail: 1071 Protocol: 1072 Invalid port number specified after "%c". 1073 Cannot create input socket for port %u, error %d: %s 1074 Users: 1076 %ld%% 1500 Sun 1501 Mon 1502 Tue 1503 Wed 1504 Thu 1505 Fri 1506 Sat 1510 None 1511 Simple 1512 GSM 1513 Simple+GSM 1514 ADPCM 1515 Simple+ADPCM 1518 LPC 1519 Simple+LPC 1526 LPC-10 1527 Simple+LPC-10 1550 Speak Freely 1551 VAT 1552 RTP 1553 Gibberish 1554 Idle 1600 speakfre.hlp 1610 propeller-heads 1611 multicasting 1612 Connection, opening new 1613 Connection, options 1614 modem, configuration 1615 answering machine 1616 Encryption, keys 1617 Hardware configuration, viewing 1618 Connection file, opening 1619 Connection, saving in a file 1620 Sound, sending sound files 1621 Sound, ring remote user 1622 Encryption, key file 1623 Directory, publishing your address 1624 Directory, searching 1625 Face image, selecting 1626 Benchmark, performance 1700 Host 1701 Name 1702 Network_address 1710 Debug 1711 Debugging 1712 Loopback 1720 Multicast 1721 Scope 1730 Encryption 1731 Save_keys 1732 PGP_user_names 1733 DES_key 1734 IDEA_key 1735 Key_file 1800 Connections 1801 Count 1810 MulticastGroups 1820 Compression 1821 Simple 1822 GSM 1823 ADPCM 1824 LPC 1830 Modem 1831 Enable 1832 Port 1833 Baud_rate 1834 Init_String 1835 Show_rant 1840 Answer 1841 File_name 1842 Record_messages 1843 Ring 1850 Preferences 1860 Fixes 1861 AlwaysBindSocket 1862 NetNoConnect 1863 NetUseSend 1864 MulticastTTLisChar 1865 AudioHalfDuplex 1866 AudioSample11025 1867 AudioInputDeviceID 1868 AudioOutputDeviceID 1869 RingMaxVolume 1870 paltalk.ini 1880 LWL_Tell 1881 Server 1882 E_mail 1883 FullName 1884 PhoneNumber 1885 Location 1886 Publish 1887 LWL_Ask 1891 ExactMatch 1892 FaceDisplay 1893 ShowFaces 1894 NoOutputOverflow 1895 EchoSurpression 1896 Protocol 1897 Transmit 1898 SynchronousHostname 1899 PortNumber 1900 NoHeartbeat 1901 RTPLargePackets 1902 NoVAT 1903 NoRTP 1904 NoRTCPCrypt 1905 SendReceived 1906 Jitter 1907 LPC10 1908 Robust 2000 Name too long 2001 Not initialized 2002 System not ready 2003 Version is not supported 2004 Can't send after socket shutdown 2005 Interrupted system call 2006 Host not found 2007 Try again 2008 Non-recoverable error 2009 No data record available 2010 Bad file number 2011 Operation would block 2012 Operation now in progress 2013 Operation already in progress 2014 Bad address 2015 Destination address required 2016 Message too long 2017 Protocol family not supported 2018 Directory not empty 2019 EPROCLIM returned 2020 Too many users 2021 Disk quota exceeded 2022 Stale NFS file handle 2023 Invalid argument 2024 Too many open files 2025 Access denied 2026 Too many levels of symbolic links 2027 The object is remote 2028 Socket operation on non-socket 2029 Can't assign requested address 2030 Address already in use 2031 Address family not supported by protocol family 2032 Socket type not supported 2033 Protocol not supported 2034 No buffer space is available 2035 Connection timed out 2036 Socket is already connected 2037 Socket is not connected 2038 Bad protocol option 2039 Connection reset by peer 2040 Software caused connection abort 2041 Network is down 2042 Network was reset 2043 Connection refused 2044 Host is down 2045 Host is unreachable 2046 Protocol is wrong type for socket 2047 Operation not supported on socket 2048 ICMP network unreachable 2049 Too many references 2099 Unknown error code 3000 The following messages should be translated when creating a localised version 3002 The audio waveform device can't record in the required format. 3003 Error Opening Wave Audio Input 3004 The waveform device can't play this format. 3005 Can't Open Wave Audio Output 3006 Can't allocate wave input headers. 3007 Can't allocate wave input buffers. 3008 Connection profile is invalid. 3009 Cannot open encrypted session key file. 3010 PGP Key Decoding 3012 Connection (*.sfx)|*.sfx|All files (*.*)|*.*|| 3013 Open Connection 3014 Save Connection 3015 Sound (*.wav;*.au)|*.wav;*.au|All files (*.*)|*.*|| 3016 Ring Sound File 3017 Send Sound File 3018 send 3019 sendto 3020 Please exit and restart Paltalk to implement this option. Thanks. 3021 &Send Sound File... Ctrl+F 3022 &Stop Sound File Ctrl+F 3023 Cannot write to modem 3024 Cannot Write To Socket 3025 Modem Connection 3026 Initialising 3027 Idle 3028 Sending live audio 3029 Sending audio file 3030 Playing received audio 3031 Unknown 3032 Dial string: 3033 Host: 3034 Modem connection 3035 Address: 3036 Transmitting 3037 3038 Failed to open file. 3039 The file is not a PCM file. 3040 The data chunk has no data. 3041 Cannot allocate memory to read WAVE file. 3042 GSM+2X compressed 3043 ADPCM+2X compressed 3044 2X compressed 3045 ADPCM compressed 3046 GSM compressed 3047 Decrypting %d bytes with key file. 3048 Decrypting %d bytes with PGP key. 3049 Decrypting %d bytes with IDEA key. 3050 Decrypting %d bytes with DES key. 3051 Cannot get modem status. 3052 1 message 3053 No messages 3054 Can't expand message table. 3055 Can't allocate message history table. 3056 Message (*.sfm)|*.sfm|All files (*.*)|*.*|| 3057 Open Message File 3058 Cannot open PGP session key file 3059 PGP Key Encoding 3060 Cannot open key file. 3061 Modem 3062 Multicast scope must be between 0 and 255. 3063 All files (*.*)|*.*| 3064 Open Key File 3065 Active 3066 Never used 3067 Active, 3068 Idle, 3069 None 3070 Terminating, 3071 Transition, 3072 Half-duplex 3073 Full-duplex 3074 Modem is in use by another connection. 3075 This is not a WAVE file. 3076 WAVE file is corrupted. 3077 Out of memory reading WAVE file. 3078 Failed to read format chunk. 3079 WAVE file has no data chunk. 3080 Cannot save connection profile. 3081 bytes. 3082 Cannot Run PGP to Decode Session Key 3083 Cannot Run PGP to Encode Session Key 3084 Exiting Speak Freely 3085 Speak Freely for Windows 3086 LPC compressed 3087 LPC+2X compressed 3088 Speak Freely 3089 Speak Freely - Broadcasting 3090 Looking up host 3091 Connecting to host 3092 Requesting server message 3093 Receiving server message 3094 Sending query to server 3095 Receiving results from query 3096 Image (*.bmp;*.gif)|*.bmp;*.gif|| 3097 Face Image File 3098 (no crypto) 3099 Cannot allocate LPC context table. 3100 User closed connection 3101 Local Loopback 3102 Cannot open RING.AU file--unable to run benchmark. 4000 The following strings should not be translated in localised versions. 4001 SFlq 4002 SFms 4003 lwl.fourmilab.ch 4004 Sun Select PC-NFS Windows Sockets Implementation 4005 DES-CBC 4006 FAQ 4007 mailing lists 4008 127.0.0.1 4009 testing, echo servers 5002 VOXGSM 5003 Voice Activation 5005 Gain Threshold 5006 VOX GSM compressed 5007 VOX Speed 5008 VOX Slow 5009 VOX Medium 5010 VOX Fast 5011 Activation Cutoff 5012 Attack 5013 Hold 5014 Decay 5015 Release 5016 Break Input 5017 VOX, setting 5018 Welcome to the Paltalk Registration Wizard! Please fill out the following screens as accurately as possible so other paltalkers can find you on the system. Contact support@paltalk.com if you have trouble with the registration process... 5019 Please take this opportunity to update your Paltalk user information. A complete set of information will help us to better serve you. Paltalk's privacy policy assures that only your name and email address will be displayed to other users. Thank you for your help...... 5020 Make sure that the exact phrase '' appears in the 'Nickname' field. (If it's not there, you can find it in the dropdown list'.) Then click 'Sign On'. Wait for the New Registration Wizard to appear... 5021 Select the existing Paltalk User account from the dropdown list. If '***' appear in the Password field, then you can proceed by pressing 'Sign On'. Otherwise, type in the password first, then hit 'Sign On' 5022 The 'Nickname' field is editable. Type in the user name in the dropdown 'Nickname' list. Type in the password in the 'Password' field. Then press the 'Sign On' button... 5023 This group is intended for general audiences. A complaint may be lodged by right clicking on the offender. Thank you and enjoy Paltalk Groups. 5024 This group contains adult content and is unsuitable for minors. By entering this group, you acknowledge that you are over 18 years of age. Thank you and enjoy Paltalk Groups. 5025 You have been designated as a Group Administrator. Administrators have the ability to bounce other users for inappropriate behavior and to assign another group member with Administrative privileges. These options are available by right clicking on a group member's name. 5026 You can add an existing Paltalk account to this computer from this logon screen. Type in (or type over) the user name in the dropdown 'Nickname' list. Type in the password in the 'Password' field. Then press the 'Sign On' button... 5027 Ginger was a big fat horse, a big fat horse was she. But don't tell that to MaryLou becuase in love with her is she.I tell you this in private, because I thought that you should know.But never say to MaryLou or both our heads will go.I've said it once, I've said it twice, I'll say it once again.Not a word of this to you know who or it will be our end!\n 5028 Use common sense when naming groups, avoid what you know\nmight be considered objectionable.\n\nAny group not suitable for minors either by virtue of its name or its\nexpected chat content MUST be classified as an adult oriented group.\n\nIf you create a group that is either obscene or derogatory, your account\nmay be restricted from all group activty indefinitely.\n 5029 This complaint does not get sent to the person you are complaining about.\nIt gets logged to our database and we review them. If the text of the\ncomplaint is something frivolous you will be warned first and risk the\nability to use groups at all if you repeat the offense.\n\nIf you have a legitimate complaint, by all means, please lodge it here.\n 5030 You may only bounce someone for inappropriate behavior. You must supply a\nreason for bouncing this person. If you continue, the person being bounced\nwill have an oppurtunity to make a comment about you. Both comments will be\nlogged and reviewed. The party that we feel is abusing the system will\nfirst be warned, and if a subsequent problem occurs with them, they will be\nbanned from using groups and/or removed from Paltalk completely.\n 5031 An administrator may only bounce you for inappropriate behavior such\nas offensive language. If you feel that you have been bounced from the\ngroup inappropriately, you may register a complaint against the person who\nbounced you.\n\nDo NOT use this feature to register a frivolous comment. We will decide\nwho we feel is abusing the system by reviewing the past history of\ncomplaints against both of you, the administrators reason to bounce you and\noptionally your comment here. That party will first be warned, and if a\nsubsequent problem occurs, they will be banned from using groups and/or\nremoved from Paltalk completely.\n 5033 \n\n
\n\n
\n\nMe
\n\n 5034 \n\nPaltalk Video\n\n\n \n \n\n 5035 \n\n
\n\n
\n\n%s
\n\n 5036 When you registered we sent a confirmation email to the address you supplied us. That email contains a short code that you must enter here. If you choose the Cancel button you can use the product but the only group you will be able to enter is the New Users Group. If the email you supplied us is invalid, you may change it using the Setup button and a new confirmation email will be sent out. 5037 Dear %s:\n\nYou have received a Paltalk Voice Mail from: %s (%s). \nAll you need to do to hear your Voice Mail is double click on the attached file.\n\nPlease note, if you are an AOL user, save the downloaded .wav file to your\nDESKTOP, not the aol/download subdirectory. Once the voicemail is saved\nonto your desktop, simply double click it to play.\n\nIf you are not yet a Paltalk user, you can visit http://www.Paltalk.com to sign up\nfor your Free Account which will enable you to actually Speak and View your\nfriends worldwide for Free!\n-----------------------------------------------------------------------------\nPersonal Message from (%s):\n\n%s\n----------------------------------------------------------------------------\nhttp://www.Paltalk.com\n"Talk Free Anywhere"\nFree Voicemail, Phone Calls, Video & Chat\n